Everbuild FIX & FILL Expanding Foam
by Everbuild
Everbuild Expanding Foam Is A Quick-Setting One-part Polyurethane Foam In Aerosol Form
Expands Up To 55 Times Its Original Volume
Possesses Insulating And Sound Deadening Properties
Fills Irregular And Broad Gaps Where Most Conventional Fillers Would Fail
Size: 500ml or 750ml
Description
EVERBUILD® FIX & FILL is a quick-setting one-part polyurethane foam in aerosol form. Everbuild Expanding Foam is supplied with attachable nozzles. The foam expands on application up to 150% of its original volume. Once cured the foam can be cut, sawn or plastered over after only one hour providing the working temperatures (can and surfaces) are between +5°C to +30°C, ideally 20°C.
- Quick setting - can be cut, sawn or plastered in 1 hour.
- Economical in use - expands up to 55 times its original volume.
- Fills irregular and broad gaps where most conventional fillers would fail.
- Possesses insulating and sound-deadening properties.
Filling:
- Gaps around pipe entries through walls.
- Gaps around window frames, door frames etc.
- Electrical wire chasing prior to plastering.
- Deep joints prior to applying sealant or plaster.
- Irregular gaps in stone, brick, concrete or plaster.
Fixing:
- Door frames.
- Timber structures.
- Window sills and thresholds.
- Window frames.
Insulating:
- Behind cladding to exterior walls.
- Behind soffit and barge boards.
Specification
Expansion: 41 litres (750ml can) 27 litres (500ml can).
Cell Structure: Medium Fine.
Full Load Bearing Stability: App, 24 hours (30mm bead).
Working Temps: 5°C - 30°C. (Optimum 20°C).
Temp Res Of Cured Bead:
- Long Term: -40 to +80°C.
- Short Term: -40 to +100°C.
Building Material Class: B3.
Compressive Strength: 2.4-3.1N/cm² (DIN 53427) at 10% stress.
Tensile Strength: 4.4-9 N/cm² (DIN 53430).
Shear Strength: 4.1-4.7 N/cm² (DIN 53427).
Water Absorption: 0.3 Vol % (DIN 53433).
Thermal Conductivity: 0.04 W/Mk (DIN 52612).
Shelf Life & Storage: 12 months in original containers at stated storage temperatures. Store upright between 10°C and 20°C. Pressurized container. Protect from sunlight and do not expose to temperatures above 50°C. Do not pierce or burn the can even after use. Store as flammable liquid. Note: Elevated temperatures will reduce shelf life dramatically.