Progress PRODESO Uncoupling & Waterproofing Membrane 30m² Roll
by Progress
Uncoupling & Waterproofing Membrane
Drastically Reduces Installation Times
Suitable For Every Type Of Subfloor, Including Very Large Surfaces
Can Be Used Internally & Externally
Thickness: 3.5mm
Size: 30m² Roll
Description
An uncoupling and waterproofing membrane for problematic substrates, balconies, terraces and horizontal surfaces of any size without expansion joints in the screed before the laying of ceramic and natural stone.
PRODESO® is a membrane in low-density polyethene provided with circular cavities and coated on both sides with a non-woven polypropylene thermowelded, which ensures the adhesion to the support and the anchoring of the floor.
PRODESO® ensures the laying of the flooring and the waterproofing of the substrate, also in case of old tiles, on cracked and not perfectly cured substrates, and therefore with possible vapour pressure.
Why Use The PRODESO® Membrane System?
• Time Efficient: PRODESO® Membrane drastically reduces installation times. From the installation of the membrane up to the laying of flooring, you can work without interruption.
• Flexible: It is suitable for every type of subfloor, including very large surfaces, both indoor and outdoor.
• Safe: It is suitable for substrates with cracks, as it does not transmit tension of the substrate to the tile coverings and vice versa. It is also suitable on substrates not perfectly cured since it allows the vapour management.
WARNINGS:
• Do not lay tiles with a size less than 5 x 5 cm. The technical and application details can be found in the PRODESO® MEMBRANE SYSTEM brochure. For other information not described in the brochure PRODESO® MEMBRANE SYSTEM, refer to the technical department.
An uncoupling and waterproofing membrane for problematic substrates, balconies, terraces and horizontal surfaces of any size without expansion joints in the screed before the laying of ceramic and natural stone.
PRODESO® is a membrane in low-density polyethene provided with circular cavities and coated on both sides with a non-woven polypropylene thermowelded, which ensures the adhesion to the support and the anchoring of the floor.
PRODESO® ensures the laying of the flooring and the waterproofing of the substrate, also in case of old tiles, on cracked and not perfectly cured substrates, and therefore with possible vapour pressure.
Why Use The PRODESO® Membrane System?
• Time Efficient: PRODESO® Membrane drastically reduces installation times. From the installation of the membrane up to the laying of flooring, you can work without interruption.
• Flexible: It is suitable for every type of subfloor, including very large surfaces, both indoor and outdoor.
• Safe: It is suitable for substrates with cracks, as it does not transmit tension of the substrate to the tile coverings and vice versa. It is also suitable on substrates not perfectly cured since it allows the vapour management.
WARNINGS:
• Do not lay tiles with a size less than 5 x 5 cm. The technical and application details can be found in the PRODESO® MEMBRANE SYSTEM brochure. For other information not described in the brochure PRODESO® MEMBRANE SYSTEM, refer to the technical department.
Areas Of Use:
Use:
Uncoupling and waterproofing membrane for cracked and not cured substates, such as:
- Wooden flooring.
- Anhydrite and cementitious screed.
- Cracked and not cured substrates.
- Old ceramic and natural stones.
- Non-perfectly cured concrete.
- Wooden structures.
- Floor heating systems.
Very resistant to saline solutions, acids and alkalis, alcohol and oils. In case of particular products, contact our technical department.
Note: For further information on other backgrounds and preparation, contact Progress Profiles' technical advisory and specification service.
Do not use:
On bituminous coverings and on lightweight screeds, not suitable for tiling. Do not use adhesives containing solvents for the membrane and flooring installation. Do not use on substrates with water rising.
Specification
Appearance: Polymeric membrane
Colour: White / Cyan blue
Total thickness: ≈ 3,5 mm (EN 1849 - 2)
Width: ≈ 1 m
Weight of PP sheet: ≈ 160 g / m² (EN 1849 - 2)
Weight of LDPE sheet: ≈ 370 g / m² (EN 1849 - 2)
Cavities number: ≈ 2500 m²
Compression resistance: 350 KN / m² (35 ton m²)
Tensile strength: (MD) 8 kN/m (EN ISO 10319:2008-10)
Tensile strength: (CD) 8,5 kN/m (EN ISO 10319:2008-10)
Strain at maximum load:
- 22 % (MD) (EN ISO 10319:2008-10)
- 42 % (CMD) (EN ISO 10319:2008-10)
Strain at maximum load:
- 25 % (MD) (ISO 13859-1-2014-07)
- 43 % (CMD) (ISO 13859-1-2014-07)
Channel volume: ≈ 1,02 lt / m2
Crack - Bridging Ability: ≥ 1,8 mm
Thermal resistance: 0,035 m² K/W (UNI EN 12664)
Working temperature: - 40°C / +80°C
Shelf life: 24 Months in a dry environment, avoiding direct sunlight and heat sources.